TOPOLYMER

TOPOLYMER ® 6 Series

The Topolymer® 6 series are TPE compounds based on Styrenic Block Copolymers (SBCs). This series was designed for injection molding and can be considered for stand-alone molded applications or for over-molding onto a rigid plastic such as PP, PS, SAN, ABS, or PC. They are completely recyclable.

Topolymer®     6 Series Color Durometer Density Tensile Strength Tensile Strength @ 100% Elongation @ Break Tear Strength Compression Set @ 23oCx22h Bondable Substrate Injection Molding Extrusion Blow Molding Spray Painting
ASTM D2240 ASTM D792 ASTM D412 ASTM D412 ASTM D412 ASTM D624 ASTM D395B
Shore A  g/cm3 MPa MPa % KN/m %
6261-401N Natural 41A 1.10 2.4 1.2 483 18 11 PP      
6201-551N Natural 56A 0.90 3.8 1.7 606 25 20 PP      
6231-601N Natural 58A 1.04 4.4 2.0 742 27 19 PP      
6261-701N Natural 65A 1.08 3.9 2.6 448 29 20 PP        
6211-751N Natural 75A 0.99 6.8 4.0 375 46 26 PP      
6261-551N Natural 54A 1.15 3.9 2.2 234 24 17 PS    
6231-701N Natural 68A 1.06 6.3 4.2 268 33 33 PS    
6231-751N Natural 76A 1.07 9.0 5.7 316 51 36 PS    
6231-801N Natural 79A 1.09 8.0 5.0 304 51 39 PS    
6211-851N Natural 85A 1.03 10.0 6.7 328 62 44 PS    
6231-851N Natural 86A 1.05 9.3 7.0 292 58 30 PS  
6231-901N Natural 88A 1.02 12.3 8.1 254 69 22 PS    
6219-501N  Natural 54A 1.02 2.9 1.1 544 18 56 PC/SAN/ABS    
6219-601N Natural 63A 0.97 3.8 1.2 558 18 54 PC/SAN/ABS    
6229-701N Natural 71A 1.06 5.5 1.7 731 28 64 PC/SAN/ABS    
6207-401C Clear 43A 0.92 6.5 0.9 1057 21 56 PETG